In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction.  This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring.  While classic in appearance, this material, and its manufacturing is as complex and high tech as it gets.

• Seamless 3-2.5 titanium tubing
• 30 g
• 21mm fore/aft adjustment
• Hand bent in Indianapolis
• Easy in-and-out
• Extremely secure design
• Laser welded
• Optimized for purist bottles

A ratchet wrench is a great tool for speeding fastener installation / removal or for getting at bolts with limited rotational access. The SILCA T-RATCHET KIT is a compact ratchet wrench that can also be configured as a T-Handle or as a bit driver. The magnetic interfaces provide quick and secure connection of the supplied assortment of S2 steel bits. The low-angle ratchet engagement makes the most of each rotation and can transfer loads far exceeding torque spec of most fasteners.

The ultimate kit to make repairs on the go or around the house. Fit into small spaces and configure the tool any way you need it. Compatible with our Ti-Torque tube for future upgrades.

• Configurable 1/4" bit driver
• Stainless Steel 1/4" extension
• S2 Steel hex bits: 2, 2.5, 3, 4, 5, 5mm
• S2 Steel Torx bits: t10, t20, t25
• S2 Steel 2mm Phillips bit
• 190g including case
• Waxed canvas case 120x70x30mm

Previous solutions to this problem have involved using a metal core inside of a plastic lever, however this solution has its own challenges as the core of the lever is where you can add the least stiffness and strength.  This leaves metal core levers both less stiff and heavier than they need to be.  

Road.cc 2021 Review, The Best of.... Click Here

GETTING STARTED:

In the meantime, here's some general advice from us.

• Tire Levers Premio should ONLY be used to remove the tire. Never use a tire lever to aid in tire installation. This is not the intended use case for the tool and could result in damage.
• Make sure the orientation of the blade of your tire lever is correct before use. Using a tire lever that is upside down is not only more difficult to use but it could result in damage.
• We don't recommend using tire levers if you're using latex inner tubes.

Carbon safe tire levers that are made from an ultra strong forged alloy with a reinforced nylon coating to protect the carbon rims.

• Carbon safe
• Forged alloy construction
• Reinforced nylon rim shield
• Integrated spoke-hook wing
• 105x25x7mm
• 36g - two levers and neoprene sleeve

A high mount digital gauge giving .5psi readouts and 1% accuracy. This is the one pump to rule all others. Fat bikes to track tubulars and everything in between are all covered in this one pump.

• 1% accurate, top mount digital gauge
• .5 psi readout
• 0 - 220psi
• Ash handle
• 731 Full-Grain Leather gasket
• Hiro locking-lever chuck (disc wheel
compatible
• Two CR2032 batteries included

- Either Manually press the power button on the display or begin pumping.

• The display will auto-on and time-out after use.
• Pressing the power button while active, changes the unit of measure.
• The “+” and “-“ buttons adjust the target pressure alert.
• If over-pressured, the display will show an error. Releasing air will reset.

A pump designed to outlast the rest of your cycling equipment. Combining a steel barrel, Italian leather gasket, and highly accurate swiss gauge, this pump can do it all. Compatible with disc chuck

• 2% accurate gauge rated to 220psi
• Full size Ash wood handle
• High-efficiency 731 leather gasket
• Classic SILCA press on chuck
• All metal and wood construction
• Brass air bridge and check valve

SILCA Black Speed 22oz Purist Water Bottle. Get them while they last because when they are gone, they are gone.

Designed with a stealth black theme, this SILCA water bottle is a 22 oz. Purist water bottle body featuring a "peek-a-boo" transparent visual guide on one side. Perfect gauge when it's time to refill. No BPA and no funny plastic after taste. The MoFlo Cap allows the fluid to flow when you need it and stop to prevent spills. Limited quantity.